Marantz CINEMA60 - Page 200

Speaker Preset
Two speaker settings can be saved to suit the environments where you
use your speakers.
For example, in some cases the characteristics of a room change
depending on whether a screen is used. By saving two different presets,
you can easily switch between the equalizer and speaker settings for each
situation that were measured with an Audyssey
®
Setup.
If you want to use a preset, select the preset you want to use and then
configure settings such as Audyssey
®
Setup or the speaker settings to
save those settings to the preset you have selected.
Speaker Preset 1
(Default):
Saves the settings to Preset 1.
Speaker Preset 2: Saves the settings to Preset 2.
0
The following settings are saved to presets.
0
“Speaker Layout” settings
0
“Distances” settings
0
“Levels” settings
0
“Crossovers” settings
0
“Subwoofer Output” settings
0
“Low Pass Filter” settings
0
“Front Speaker” settings
0
“MultEQ
®
XT” data
0
“Graphic EQ” data
0
This setting also be configured using “Speaker Preset” in the option menu.
(v p. 120)
Contents Connections Playback Settings Tips Appendix
200
Front panel Display Rear panel Remote Index