Marantz Consolette MS7000 - Setting the Clock (Clock)

21
Setting the clock (Clock)
You can automatically adjust the clock of this unit using the Internet.
To use this function, the unit must be connected to the Internet.
Adjusting the clock automatically (Auto
Adjust)
This function automatically adjusts the clock at power on or other
times.
1
Press FUNCTION repeatedly until
“Settings” is displayed.
Settings
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Clock”,
then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Clock
3
Turn GYRO to select “Auto Adjust(On)”, then press
ENTER.
Auto Adjust(On)
4
Turn GYRO to select “Auto-Adjust On” or “Auto-
Adjust Off”, then press ENTER.
Auto-Adjust On
Automatically adjusts the clock.
The operation to receive the current time starts.
Auto-Adjust Off
Does not automatically adjust the clock.
•If you press
ENTER, the setting is entered and “Auto Adjust” menu
is displayed again.
n Exiting the menu to return to the normal mode
Press FUNCTION repeatedly until “Source” is displayed.
•The unit exits the setting mode and the normal display returns.
Setting the Time Zone
(Time Zone)
Use the following procedure to select your local standard time (time
zone).
1
Press FUNCTION repeatedly until
“Settings” is displayed.
Settings
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Clock”,
then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Clock
3
Turn GYRO to select “Time Zone(-5H)”, then press
ENTER.
Time Zone(-5H)
4
Turn GYRO to select your local standard time (time
zone) in your lives, then press ENTER.
The “Time Zone” menu is displayed again.
n Exiting the menu to return to the normal mode
Press FUNCTION repeatedly until “Source” is displayed.
•The unit exits the setting mode and the normal display returns.
Setting the Daylight Saving Time
(Daylight Saving Time)
Use the following procedure to set Daylight Saving Time if the Daylight
Saving Time system is used in your country.
1
Press FUNCTION repeatedly until
“Settings” is displayed.
Settings
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
2
Turn GYRO to select “Clock”,
then press ENTER.
ELECTRONIC GYRO TOUCH
ENTER
FUNCTION
PLAY/PAUSE
Clock
3
Turn GYRO to select “Daylight Saving Time(Off)”,
then press ENTER.
Daylight Saving Time(Off)
4
Turn GYRO to select “DST Off” or “DST On”, then
press ENTER.
The “Daylight Saving Time” menu is displayed again.
n Exiting the menu to return to the normal mode
Press FUNCTION repeatedly until “Source” is displayed.
•The unit exits the setting mode and the normal display returns.
Preparation
Operation
Information
Operation