Do you have a question about the Marantz HD-CD1 and is the answer not in the manual?
Device type | HiFi CD player |
---|---|
MP3 playback | Yes |
Product color | Black |
Channels quantity | 2 channels |
Channel separation | 98 dB |
Disc playback modes | Programming, Random, Repeat all |
Playback disc types | CD, CD-R, CD-RW |
Frequency range | 2 - 20000 Hz |
Audio formats supported | MP3, WMA |
Signal-to-Noise Ratio (SNR) | 110 dB |
Total Harmonic Distortion (THD) | 0.002 % |
Headphone outputs | 1 |
SACD playback | No |
Power source type | AC |
Power consumption (standby) | 0.35 W |
Power consumption (typical) | 14 W |
Depth | 312 mm |
---|---|
Width | 304 mm |
Height | 109 mm |
Weight | 5700 g |
Highlights the HDAM® SA2 circuit and Cirrus Logic D/A converter for superior audio.
Description of power, standby, disc tray, and skip buttons and indicators.
Details fast-forward, stop, pause, play buttons, remote sensor, headphone jack, and volume control.
Details audio output, digital output, remote control jacks, and external/internal switch.
Covers power, mode selection, system buttons like skip, play/pause, and stop.
Details playback mode, information display, cursor, back, number, program, and time buttons.
Covers repeat, dimmer, enter, setup, clear, A-B repeat, and quick replay buttons.
How to turn the unit on and switch it to standby mode, including indicator status.
Steps for inserting a disc and starting playback using the remote control or unit buttons.
Instructions for playing MP3, WMA, and AAC files recorded on CD-R or CD-RW discs.
Step-by-step guide on how to access, select, and change settings in the unit's menu.
Adjusting headphone amplifier gain (LOW, MIDDLE, HIGH) based on headphone impedance.
Solutions for the unit not turning on or automatically turning off due to standby modes.
Causes and solutions for when remote control operations fail.
Solutions for issues like a blank display or display showing nothing.
Addresses issues of no sound, distorted sound, or low headphone volume.
Solutions for unplayable discs, CD-R/RW issues, and error messages like 'No Disc'.