Need help?Do you have a question about the Marantz SA8400 and is the answer not in the manual?
General| Type | SACD/CD Player |
|---|---|
| Disc formats | SACD, CD, CD-R/RW |
| Frequency response (SACD) | 2 Hz - 50 kHz |
| Frequency response (CD) | 2 Hz - 20 kHz |
| Signal-to-Noise Ratio | 110 dB |
| Dynamic range (SACD) | 110dB |
| Dynamic range (CD) | 100dB |
| Total Harmonic Distortion (CD) | 0.0025% |
| Channel separation | 110 dB |
| Output Voltage | 2.0 V |
| Digital Outputs | Coaxial, Optical |
| Analog outputs | RCA |
| Dimensions (W x H x D) | 440 x 133 x 375 mm |
| Weight | 7.5 kg |
Details warranty service contact information and procedures.
Emphasizes the importance of retaining the purchase receipt for warranty and insurance purposes.
Confirms compliance with EMC and low-voltage directives, specified for S version.
Covers essential safety warnings and advice for player installation.
Outlines general operating precautions and safe cable connection procedures.
Details the player's advanced features and the Super Audio CD technology.
Covers playback of CD-RW/CD-R discs and the different formats of Super Audio CDs.
Provides guidelines for handling, cleaning, and storing discs to prevent damage and ensure playback.
Advises on suitable locations, avoiding direct sunlight, heat, dust, and humidity for optimal performance.
Includes advice on placement, power cord handling, and avoiding user repairs.
Covers condensation, potential interference, and disc type limitations (e.g., no CD-ROMs).
Instructions for battery installation and guidelines for remote control operation.
Details all buttons, switches, jacks, and indicators on the front panel.
Explains the function of each button on the remote control for playback and mode selection.
Describes all input/output jacks, filter switches, and voltage selectors on the rear panel.
Explains the main display, music calendar, and various status indicators.
Guide for connecting analog and digital audio outputs to external systems.
Clarifies digital signal output behavior for CD vs. Super Audio CD playback.
Steps to connect the player to power and the audio system.
Instructions for turning on, inserting a disc, and starting playback.
Functions for starting, stopping, ejecting, pausing, and changing time display.
How to select audio layers on hybrid discs and set the initial playback mode.
Methods for searching specific tracks, skipping, and selecting parts of a disc.
Details All Track Repeat, One Track Repeat, and A-B Repeat functions.
Instructions for playing tracks randomly or in a user-defined sequence.
Covers checking, deleting, clearing, and adding tracks to programmed playback.
Function to search for desired tracks by playing their beginnings.
Procedure for setting a jump-back time interval for quick replay.
How to view track titles, album titles, and artist names during playback or stop mode.
Instructions for using the player with an audio timer for scheduled playback.
Explanation of the STANDARD/CUSTOM filter switch for audio quality and protection.
Addresses common problems like disc not rotating, no sound, or mid-operation stops.
Covers issues with specific disc types, unit sounds, and remote control failures.
Details analog/digital outputs, frequency range, signal format, and sampling frequency.
Covers power supply, consumption, physical dimensions, weight, and included accessories.
To Next Page
