EasyManua.ls Logo

Marantz SA8005 - User Manual

Marantz SA8005
77 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Appendix
TipsSettingsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Owner’s Manual
Super Audio CD Player
SA8005
You can print more than one page of a PDF onto a single sheet of paper.

Table of Contents

Other manuals for Marantz SA8005

Preview: Getting Started Guide
Getting Started Guide12 pages

Questions and Answers

  • J
    Jennifer BradfordAug 18, 2025
    What to do if Marantz SA8005 remote control not working?
    • M
      Michele KramerAug 18, 2025
      If operations cannot be performed through the remote control unit of your Marantz CD Player, try the following: * Replace the batteries with new ones. * Ensure you are within 23 ft/7 m of the unit and within a 30° angle. * Remove any obstacles between the unit and the remote. * Insert the batteries in the correct direction, checking the q and w marks. * Move the unit if the remote control sensor is exposed to strong light. * Adjust the direction and distance of any 3D video devices to prevent interference. * Press the REMOTE MODE CD button. * Set the switch to “INTERNAL” if using the unit independently.
  • J
    Joann SnyderAug 20, 2025
    Why does my Marantz CD Player turn off by itself?
    • L
      Luis RyanAug 21, 2025
      If your Marantz CD Player automatically turns off, it may be due to the Auto Standby mode being enabled. To disable this feature, go to the menu and set “Auto Stnby” to “Off”.
  • S
    Sophia CarrollAug 23, 2025
    What to do if Marantz SA8005 CD Player has no sound?
    • J
      johnnybarajasAug 23, 2025
      If you are not getting any sound or the sound is distorted from your Marantz CD Player, check the connections for all devices and make sure the connection cables are fully inserted. Ensure that input and output connectors are not reversely connected and inspect the cables for any damage. Also, check the amplifier’s functions and controls, adjusting as needed, and verify the Audio Out settings are at the appropriate level.
  • J
    Jeffrey PetersAug 26, 2025
    What does 'No Device' mean on Marantz CD Player?
    • R
      rhuffmanAug 26, 2025
      If your Marantz CD Player displays “No Device”, “Check FS” or “Check Device”, ensure the USB memory device is properly connected by disconnecting and reconnecting it. USB memory devices of a mass storage class are supported. Connect the USB memory device directly to the USB port, without using a USB hub. The USB memory device must be formatted to FAT16 or FAT32. If you are using a portable hard disc drive that requires power from an AC adapter, use the adapter that came with the drive. Note that not all USB memory devices are guaranteed to work.
  • A
    Allison PearsonAug 27, 2025
    How to turn on Marantz SA8005 CD Player?
    • J
      jasondownsAug 28, 2025
      If your Marantz CD Player isn't turning on, first ensure the power plug is properly inserted into the power outlet. Also, the unit might be in standby mode. Try pressing the X button on the unit or the POWER X button on the remote control to turn it on.
  • B
    Brady JonesAug 30, 2025
    How to turn on display on Marantz SA8005?
    • D
      Dustin ClarkeAug 30, 2025
      If your Marantz CD Player display is off, press the DIMMER button to switch to a setting other than off.
  • T
    Tracy BauerSep 1, 2025
    Why does my Marantz CD Player say 'No Disc'?
    • S
      Susan LewisSep 1, 2025
      If your Marantz CD Player displays “No Disc”, make sure that the disc is loaded correctly (label side up) and that a disc is actually loaded.
  • B
    Brittany CaldwellSep 3, 2025
    What does '0 0:00' mean on Marantz CD Player?
    • S
      Stacy SpencerSep 3, 2025
      If your Marantz CD Player displays “0 0:00”, it means that the loaded disc cannot be played.
  • V
    vgambleSep 6, 2025
    What to do if Marantz SA8005 CD Player cannot playback?
    • J
      John LyonsSep 6, 2025
      If your Marantz CD Player isn't playing when the 1 button is pressed, or a specific part of the disc isn't playing correctly, the CD may be dirty or scratched. Clean the CD or try a different one.
  • S
    Stephen HuberSep 8, 2025
    Why won't my Marantz CD Player play CD-R/CD-RW discs?
    • A
      Adam HenrySep 8, 2025
      If your Marantz CD Player cannot playback CD-R/CD-RW discs, ensure that the disc has been finalized. The issue may also be due to poor recording conditions or the disc quality. Use a correctly recorded and finalized disc. Also, note that the DATA CD playback function only supports MP3 and WMA files.

Summary

Product Introduction and Accessories

Safety Precautions

Essential safety guidelines for proper and safe product usage.

Key Features

Connections Guide

Connecting Computers and Portable Devices

Setup for PC/Mac, iPod, and USB memory devices.

Playback Operations

Basic Operation and Media Selection

Covers power, media modes, and display settings.

Disc Playback

Instructions for playing CDs, Super Audio CDs, and DATA CDs.

Digital and Computer Audio Playback

Using the unit as a D/A converter and playing from a computer.

Portable Device Playback

System Settings

Tips and Troubleshooting

Troubleshooting Guide

Solutions for common operational problems.

Marantz SA8005 Specifications

General IconGeneral
Frequency range2 - 20000 Hz
Audio formats supportedAAC, MP3, WMA
Signal-to-Noise Ratio (SNR)110 dB
Total Harmonic Distortion (THD)0.0018 %
CD-R playbackYes
Playback disc formatsCD audio
Device typePortable CD player
Product colorGold, Silver
Housing materialAluminum
Channels quantity2 channels
Playback disc typesCD-R, CD-RW
Disc types supportedCD, CD-R, CD-RW
Number of optical discs1 discs
Power source typeAC
AC adapter frequency60 Hz
AC adapter input voltage120 V
Power consumption (standby)0.2 W
Power consumption (typical)29 W
Headphone outputs1
USB 2.0 ports quantity2
Weight and Dimensions IconWeight and Dimensions
Depth341 mm
Width440 mm
Height106 mm
Weight8000 g

Related product manuals