Marantz SA8005 - Connecting Computers and Portable Devices

21
Appendix
TipsSettingsPlayback
Contents
Front panel Display Rear panel IndexRemote
Connections
Connecting a PC or Mac
By connecting a computer to the USB-DAC port on the rear panel of this unit using a commercially available USB connecting cable, this unit can be used
as a D/A converter (vpage44 “Using as a D/A converter”).
Computer on which the driver
software and audio player
software are installed
USB 2.0 cable (sold separately)
Type B
Type A
%
• Install the dedicated driver software on the computer to
enable communication between the computer and this
unit in order to playback high-resolution sound source
(DSD signal or 192 kHz/24 bit PCM signal) audio available
on the internet “Installing the dedicated driver (Windows
OS only)” (vpage45).
• Download the driver software from the SA8005 page of
the Marantz website.
NOTE
• Use a cable that is 3 m or less to connect to the computer.