o
Connecting an external control device
This unit can be controlled by connecting a control box or other control
device to the FLASHER IR IN jack of this unit.
Control box
or
control device
GND
Signal
Monaural mini-plug cable
(Sold separately)
o
Connecting the power cord
Connect the power cord included in the box to the back of this unit and
the plug to a wall outlet.
for North America
(AC 120 V, 60 Hz)
for Europe
(AC 220 - 240 V, 50/60 Hz)
Contents Setup Playback Troubleshooting Status LED Appendix
10
To Next Page
Loading...
