EasyManuals Logo

Marantz MM7025 Specifications

Marantz MM7025
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MM7025
140 Watt x 2-Channel Power Amplifier
The Marantz MM7025 Stereo Power Amplifier answers many needs for both two-channel devotees and home theater enthusiasts
alike. It produces 140 watts of full-bandwidth, very low distortion power per channel, so it can precisely control demanding speak-
ers in large rooms or deliver subtle nuance in smaller acoustic environments.
The MM7025’s advanced technology serves all your listening needs. Current feedback circuits, originally developed for the Ma-
rantz’s Reference Series amps, insure the purest sonic reproduction regardless of source. In the final amplification stage, specially
selected LAPT Hyper-Power output transistors, also borrowed from the Reference Series, deliver fortissimo and pianissimo pas-
sages with equal aplomb.
The MM7025’s heavy duty, gold-plated, four-way binding posts accept virtually any choice of loudspeaker cable The amplifier is
less than 14” deep from front panel to rear speaker terminals. This lets you place the MM7025 almost anywhere – in a cabinet or
on a shelf. Selectable single-ended and balanced inputs assure easy connectivity in any system. This is Marantz quality at its best.
 Porthole Display with Blue Illumination Accent
 140W/ch (8 ohms), 170W( 6 ohms) RMS Power (20Hz-20kHz)
 “Current Feedback” Amplifier Output Stage
 High Instantaneous Peak Current design
 Low Impedance Continuous Drive Capability
 Custom Sound Tuning
 Marantz Reference-Grade Filter Capacitors and High-Speed
Output Transistors
 Gold Plated, High Grade Loudspeaker Terminals
 Flasher Input/DC Trigger In/Out /RC-5 Remote Control
 Detachable Power Cord (IEC320 2pin type)

Other manuals for Marantz MM7025

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz MM7025 and is the answer not in the manual?

Marantz MM7025 Specifications

General IconGeneral
Output level2.4 mV
Damping factor100
Amplifier class-
Frequency range20 - 20000 Hz
Output impedance30000 Ω
Input sensitivity1.2 mV
Audio output channels2.0 channels
Peak power per channel170 W
Signal-to-Noise Ratio (SNR)105 dB
Total Harmonic Distortion (THD)0.03 %
RMS power output per channel (8 Ohm)140 W
AC (power) inYes
Audio (L/R) in2
Line inputs (RCA)1
Speakers connectivity typeXLR
MaterialMetal
Cooling typePassive
Product colorBlack
Connectivity technologyWired
Power consumption (standby)0.4 W
Power consumption (typical)220 W
Weight and Dimensions IconWeight and Dimensions
Depth350 mm
Width440 mm
Height126 mm
Weight10500 g

Related product manuals