Marantz NA8005 - Connecting to a Device with Digital Audio Input Connectors; Digital Audio Input

Connecting to a device with digital audio input connectors
Use this connection to output digital audio signals from this unit, and convert the signals for playback using the D/A converter of a connected device.
.
126+%#.
+0
%1#:+#.
+0
AV receiver /
D/A converter
NOTE
0
Digital audio output is stopped during playback of the USB-DAC (DSD signals and linear PCM signals that have a 32 kHz sampling frequency).
0
Use the Digital Out button to set the digital audio output on or off. (v p. 33)
Contents Connections Playback Settings Tips Appendix
19
Front panel Rear panel
Remote control
unit
Index