Marantz NA8005 - Performing Repeat Playback; Performing Random Playback; Removing the USB Memory Device

Performing repeat playback
1
Press REPEAT L.
Repeat playback starts.
0
The repeat mode is switched each time the button is pressed.
(Single-track repeat):
Only 1 track plays repeatedly.
(All-track repeat):
All tracks within the current
playback folder are repeated.
Repeat off (indicator turns off): Normal playback resumes.
Performing random playback
1
Press RANDOM P.
The P indicator on the display is lighted and all tracks in the current
playback folder are randomly played back.
o
Canceling random playback
Press RANDOM P.
The P indicator on the display turns off.
Removing the USB memory device
1
Press POWER X to set the standby mode.
2
Check that the communication indicator on the USB
memory device is not flashing, then pull ut the USB
memory device.
NOTE
Do not remove the USB memory device from the unit when the USB memory
communication indicator is flashing. Doing so may damage the USB memory
device, or may corrupt the files recorded on the USB memory device.
Contents Connections Playback Settings Tips Appendix
61
Front panel Rear panel
Remote control
unit
Index