Marantz PM-KI RUBY User Guide

There are five steps to the setup process.
1. Install batteries in the remote control unit
2. Connect the speakers to the amplifier
3. Connect the CD player to the amplifier
4. Plug the power cord into a power outlet
5. Begin CD playback.
Install batteries in the remote control unit
Connect the speakers to the amplifier
Connecting the speaker cables
1. Peel off about 10 mm of sheathing from the tip of the speaker cable, then either twist the core wire tightly or

Marantz PM-KI RUBY Specifications

General

Type	Integrated Amplifier
Signal to Noise Ratio MC	75 dB
Damping Factor	100
Dimensions	440 x 127 x 453 mm
Frequency Response	5Hz - 50kHz
Total Harmonic Distortion	0.005%
Input Sensitivity MM	2.5 mV / 47 kohm
Input Sensitivity	200 mV / 22 kohm