Marantz PM6006 Quick Start Guide

2
1
Install batteries in the
remote control unit
Batteries
There are six steps to the setup process.
1
Install batteries in the remote control unit
2
Connect the speakers to the amplifier
3
Connect the CD player to the amplifier
4
Plug the power cord into a power outlet
5
Turn on the power of the amplifier and then set
the speakers for audio output to SPEAKERS A
6
Begin playback
Setup

Marantz PM6006 Specifications

General

Amplifier class	-
Frequency range	10 - 70000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	60 W
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.08 %
RMS power output per channel (8 Ohm)	45 W
AC (power) in	Yes
Audio (L/R) in	5
Audio (L/R) out	1
Speakers connectivity type	RCA
Purpose	Home
Product color	Black
Remote control type	RC003PMCD
Connectivity technology	Wired
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	155 W

Weight and Dimensions

Depth	370 mm
Width	440 mm
Height	105 mm
Weight	7600 g