Contents [ hide
1 Before You Begin
2 Setup
3 Install batteries in the remote control unit
4 Connect the speakers to PM6007
5 Connect the CD player to PM6007
6 Plug the power cord into a power outlet
7 Turn on the power of PM6007 and then set the speakers for audio output to SPEAKERS
A
8 Begin CD playback
9 File Downloads
10 References
11 Related Manuals
Before You Begin
Setup
There are six steps to the setup process.
1. Install batteries in the remote control unit
2. Connect the speakers to PM6007
3. Connect the CD player to PM6007
4. Plug the power cord into a power outlet
5. Turn on the power of PM6007 and then set the
To Next Page
Loading...
