BeFore use
usage oF remote coNtroller
loadiNg Batteries
Before using the remote controller for the first time,
load the batteries in the remote controller. The
batteries provided are used to verify the operations
of the remote controller only.
1. Remove the battery cover.
2. Insert the batteries with correct +/–
orientation.
3. Close the battery cover until it clicks shut.
cautioNs oN haNdliNg Batteries
Misuse of the batteries can result in electrolyte
leakage, rupturing, corrosion, etc.
Bear in mind the following points when using
batteries.
• Remove the batteries from the remote control
unit if the unit is not going to be used for a
prolonged period (a month or more).
• Do not use an old battery together with a new
one.
• Insert the batteries while ensuring that their
ª and · poles are properly aligned with the
corresponding markings on the remote control
unit.
• Batteries with the same shape may have different
voltages. Do not use different types of batteries
together.
• If electrolyte has leaked, thoroughly wipe the
inside of the battery compartment, and then
insert new batteries.
• When batteries which are no longer required are
to be discarded, follow the dire
ctions (regulations)
laid down by the local authorities in the area
concerned for their disposal.
operatioNal raNge
Operate the unit with the remote controller within
the range of the illustration below.
Approx. 5m
Remote controller
Precautions
•Do not allow direct sunlight, an inverter
uorescentlightorotherstrongsourceoflightto
shineontotheplayer’sinfraredsignalreception
window(remotesensor).Otherwise,theoperation
oftheremotecontrolunitmaybedisabled.
•Bearinmindthat operating theremote control
unitmaycauseotherdevicesoperatedbyinfrared
raystobeoperatedbymistake.
•Theremotecontrolunitcannotbeoperatedifthe
space between the controller and the player’s
remotesensorisobstructed.
•Donotplaceanyobjectson top of the remote
controlunit. Doing so maycause one or more
buttons to be held down which will cause the
batteriestorundown.