Marantz PMD670 - Erasing EDL Marks and Tracks

TRACK
TRACK
TRACK
TRACK
- 21 -
TRACK
TRACK
TRACK
TRACK
Track number flash-
ing in the ERASE
display.
Press and release the FWD/+ button
or the
-/REW button
to select the track number
you want to erase.
Example track
34.
While the track to be erased is flashing (5 sec-
onds) press and release the ENTER button
.
(Or press and release the STOP button
to
cancel.)
EXECUTING will
be displayed
momentarily.
Done will be dis-
played momen-
tarily.
The PMD670 and the display will return to stop
mode.
The recording time (file space on the CF card)
used by the erased track is available for record
ing.
press and release the MARK/
EDIT button two
more times.
While the display is
flashing (5 seconds)
How to erase all EDL marks within one track
From stop press and hold the MARK/
EDIT
button for about 2 seconds to enter Edit mode.
Renumber flashing in the display.
TrkMkErase flashing
in the display.
While TrkMkERASE is flashing (5 seconds) press
and release the ENTER button
.
Press and release the FWD/+ button
or the
-/REW button
to select the track that con-
tains the EDL Marks you want to erase.
Example Track 12.
While the track number is flashing (5 seconds)
press and release the ENTER button
. (Or
press and release the STOP button
to can-
cel.)
EXECUTING
will be displayed
momentarily.
Done will be
displayed mo-
mentarily.
The PMD670 and the display will return to stop
mode.