Why can't my Marantz Stereo Receiver play 96kHz PCM signals?
If your Marantz Stereo Receiver is not playing a 96kHz PCM signal, it may be because the disc player is not 96kHz PCM digital out capable, or the Surround mode is set to other than STEREO and AUTO. Use a player that responds to 96kHz PCM digital out, or set the Surround mode to STEREO or AUTO.
Why is sound coming from the wrong channel on my Marantz Stereo Receiver?
If you are hearing sound from the wrong channel on your Marantz Stereo Receiver, it is likely due to the speaker cables being connected incorrectly. Refer to the connection diagram and ensure that all speaker cables are connected correctly.
Why is my Marantz Stereo Receiver playing sound from the wrong input?
If your Marantz Stereo Receiver is outputting sound and pictures from equipment not selected with the function selector, the input cable may be connected incorrectly. Refer to the connection diagram to ensure the cable is correctly connected.
Why can't I change surround mode on my Marantz Stereo Receiver?
If you're unable to change the surround mode on your Marantz Stereo Receiver, check if headphones are connected to the headphone jack. When headphones are connected, the surround mode is fixed to STEREO. Disconnect the headphones to change the surround mode.
Why is my Marantz Stereo Receiver center speaker not working?
If you're not getting any sound from the center speaker on your Marantz Stereo Receiver, it could be due to a few reasons: * The center speaker cable might not be completely connected. Ensure the cable is correctly connected. * 'STEREO' might be selected for Surround mode. When STEREO is selected, no sound will come from the center speaker; select another Surround mode. * 'Center = NONE' might be selected in SETUP mode. Make the correct setting in SETUP mode.
Why is there no sound from my Marantz Stereo Receiver surround speakers?
If you're not getting any sound from the surround speaker on your Marantz Stereo Receiver, here are some possible causes: * The surround speaker cable connection is incomplete. Connect the cable correctly. * 'STEREO' is selected for Surround mode. When STEREO is selected, no sound will be output from the surround speaker. Set another Surround mode. * 'Surround = NONE' is selected in SETUP mode. Make the correct setting.
What to do if my Marantz Stereo Receiver lost programmed stations?
If you cannot get a programmed station when pressing the PRESET button on your Marantz Stereo Receiver, it is likely that the preset data has been erased. Disconnecting the power plug for long periods can erase this data. Input the preset data again.
Why is my Marantz Stereo Receiver making noise during AM reception?
If you hear noise during AM reception on your Marantz Stereo Receiver, it could be due to interference from other electrical fields. Try changing the location where the AM indoor antenna is set up.
Why won't my Marantz Stereo Receiver play DTS sources?
If your Marantz Stereo Receiver cannot play DTS sources, it may be because the Surround mode is set to DOLBY, or the DVD or LD player is not DTS digital out capable. Select another mode or use a player which responds to DTS-digital out.
Why is my Marantz Stereo Receiver making noise with DTS CDs?
If you're experiencing noise during DTS-encoded CD or laser disc playback on your Marantz Stereo Receiver, ensure that you're using a digital connection and have selected digital input. If analog input is selected, switch to digital input.
Provides critical warnings regarding electrical shock and fire hazards, urging user caution.
Details power switch, headphone jack, input selector, surround modes, and A/D selection.
Covers tuner controls, copy functions, and bass/treble tone adjustments.
Explains auxiliary inputs, volume, auto tuning, preset, display off, and gyro tuning.
Details the video source indicator and the infrared sensor window.
Explains the primary display area and encoded signal status indicators.
Details indicators for tuner status, multiroom, copy, night mode, peak levels, and attenuation.
Describes indicators for encoded channel status and the display off function.
Details antenna inputs, analog audio I/O, component video inputs, and outputs.
Covers video/S-video inputs/outputs for various sources and monitor outputs.
Details digital audio outputs, multiroom outputs, main amplifier inputs, and speaker terminals.
Covers remote control terminals, multi-room remote connections, and AC outlets/inlet.
Introduces the RC-18SR remote, its operation modes, and function buttons.
Explains operational range, battery loading, and receiving control codes.
Introduces the OSD menu for system setup, surround modes, speaker config, and levels.
Covers system setup, speaker size, distance, and level adjustments.
Explains OSD menu navigation and detailed speaker setup parameters.
Details setting speaker distances for time alignment and calibrating levels using test tones.
Explains how to assign digital inputs and configure system settings.
Details each surround mode and its behavior with different input signals.
Covers multi-room operation, volume control, and on-screen display status.
Guides on tuning stations manually and using auto-tuning features.
Covers manual preset tuning, auto tuning, and station name presets.
Explains playback operations and listening to different audio sources with video.
Details multi-room operation, dialogue normalization, and TV auto power functions.
Covers setting the sleep timer and adjusting remote lighting/contrast.
Introduces the RC-18SR remote, its operation modes, and function buttons.
Details macro programming, direct commands, page selection, and clone mode.
Covers cursor buttons, mute, guide, lighting, and LCD window information.
Explains battery indicators, transmitter/receiver windows, and learn/name modes.
Guides on basic remote operation and selecting component commands.
Provides step-by-step instructions for teaching the remote new commands.
Explains how to rename functions and clear memorized remote codes.
Introduces macro programming for automating sequences of commands.
Provides detailed steps for programming and revising macro sequences.
Covers adjusting remote lighting, contrast, and beep sound settings.
Explains how to change the remote's RC-5 code set for different regions.
Details each surround mode and its behavior with different input signals.
Lists common symptoms, causes, and remedies for operational problems.
Explains how to reset the unit to factory settings and the memory backup function.
General| Brand | Marantz |
|---|---|
| Model | SR-18EX |
| Category | Stereo Receiver |
| Language | English |
To Next Page
