10
ENGLISH
5. When up to 30 stations have been preset, the auto preset
memory function automatically stops.
To stop in mid-operation, press the MEMO button ⁄2 or the
“0” button e on the remote control.
Note:
- If you operate the auto preset memory again, new
received frequency is stored into the preset memory 01
to 30. The previous preset memories are replaced to
new one.
- Preset Memory is not erased. Preset memory can be
replaced only.
RECALLING A STATION FROM THE PRESET MEMORY
1. Press TUNER button . until “Preset” is displayed.
2. Turn the JOG control m or press the 4 !0 or the ¢
button !1 to select a station.
For direct selection with the remote control, press numeric
button.
MEMORY BACKUP
The preset memory is stored for 1 week if the AC plug is pulled
out the AC outlet. If this period is longer than 1 week, the
memory is cleared. In this time, you need to set the preset
memory again.
R
TM
+
PHONES
WOW
MEMO
BAND
TIMER
TUNER
AMP
VOLUME
STANDBY DISPLAY MUTE OPEN
12
To Next Page
Loading...
