Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v
p. 200)
.
Sound mode
Channel output
Front L/R Center Surround L/R
Surround Back
L/R
Front Height
L/R
Top Front L/R Top Middle L/R
Front Dolby
Atmos Enabled
L/R
Surround Dolby
Atmos Enabled
L/R
Subwoofer
Direct/Pure Direct (2-channel)
S Dz5
Direct/Pure Direct (Multi-channel)
SDDDz3 Dz3 Dz3 Dz3 Dz3 Dz3 D
Stereo
S D
Multi Ch In
SDDD D
Dolby Surround z1 SDDDz4 DDDDDD
DTS Neural:X z2 SDDDDDDDDD
Dolby Digital
SDD D
Dolby Digital Plus
SDDDz3 Dz3 D
Dolby TrueHD
SDDDz3 Dz3 D
Dolby Atmos
SDDDDDDDDD
DTS Surround
SDDD D
DTS 96/24
SDDD D
DTS-HD
SDDDz3 Dz3 D
DTS Express
SDDD D
DTS:X
SDDDDDDDDD
Multi Ch Stereo
SDDDDDDDDD
Virtual
S D
z1
The applicable sound mode includes “Dolby Surround” and sound modes that have “+Dolby Surround” in the sound mode name.
z2
The applicable sound mode includes “DTS Neural:X” and sound modes that have “+Neural:X” in the sound mode name.
z3
A signal for each channel contained in an input signal is output as audio.
z4 Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v p. 202)
z5 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (v
p. 208)
Contents
Connections Playback Settings Tips Appendix
259
Front panel Display Rear panel Remote Index
To Next Page
Loading...
