2. PANEL / REMOTE LOCK Selection Mode
2.1. Actions
Switch the PANEL LOCK and REMOTE LOCK modes between on and off.
• PANEL LOCK Mode (with Volume)
Disables reception from all keys and encoders on the front panel except the power button (including
the volume).
• PANEL LOCK Mode (without Volume)
Disables reception from all keys and encoders on the front panel except the power button and
volume encoder.
• PANEL LOCK mode is turned off
2.2. Starting up
While holding down buttons "
M-DAX
" and "DIMMER" simultaneously, press the power button to turn
on the power.
Select the desired mode using the "
TUNER PRESET CH +/-
" button, then press the "
STATUS
" button
to conrm.
2.3. Displaying and Selecting Each Mode
The information shown on the display switches each time the "
TUNER PRESET CH +/-
" button is
pressed.
Press the "
STATUS
" button to set the currently displayed mode and restart the device.
The setting with "
*
" is selected for each mode.
q
L1
P/V LOCK
L2
*On
L3
The buttons on the unit and the master volume knob does not function.
w
L1
FP LOCK
L2
On
L3
The buttons on the unit does not function.
e
L1
FP LOCK
L2
*Off
L3
The PANEL LOCK mode is turned off.
r
L1
RC LOCK
L2
On
L3
The device cannot be operated by the remote control.
t
L1
RC LOCK
L2
*Off
L3
The REMOTE LOCK mode is turned off.
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
135