EasyManuals Logo

Marantz SR6003 Specifications

Marantz SR6003
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
From its sleek compound-curve front panel to the high definition audio design, the SR6003 surround sound
receiver contains a stunning array of technologies to increase your A/V enjoyment. Seven amplifier channels,
each capable of delivering 100 continuous watts. Full HDMI 1.3 capability. A complete array of new processing
technologies. The SR6003 demonstrates once again that Marantz leads the way to home entertainment.
Sophisticated new aluminum/reinforced resin front panel
High Bit Rate Audio capability: Dolby TrueHD, dts-HD Master Audio
HDMI v1.3a repeating (3 in/2 out)
Audyssey MultEQ
M-DAX for compressed audio
USB input for Audio playback
Simple color GUI
10bit Video converter to HDMI (interlaced to progressive and scaler)
Dual HDMI and component video outputs
Analog and digital multi-zone outputs
In-line seven channel amplifiers/High definition audio design
New FL display
Updated LCD backlit Learning remote controller
<16" Shallow chassis
Various control interfaces: RS-232C, Flasher in, DC trigger)
Multiple radio system (AM/FM/XM/SIRIUS)
Fold-up door for clean looking front panel
SR6003
Dolby TrueHD
®
/ dts
®
-HD Master Audio AV Receiver
Life Amplified
TM
Compatible
®

Other manuals for Marantz SR6003

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Marantz SR6003 and is the answer not in the manual?

Marantz SR6003 Specifications

General IconGeneral
Channels7.1
HDMI Inputs4
HDMI Outputs1
Response Bandwidth10 Hz - 100 kHz
Signal-To-Noise Ratio105 dB
THD0.08%
Input Impedance47 kOhm
Input Sensitivity200 mV
Tuner BandsAM/FM
HDMI SwitchingYes
Frequency Response10 Hz - 100 kHz
HDMI Pass-ThroughYes
AM/FM TunerYes
Multi-room OutputYes
Zone 2 OutputYes
Dolby TechnologiesDolby Digital Plus, Dolby TrueHD
DTS TechnologiesDTS-HD Master Audio
Video UpscalingUp to 1080p
Network ConnectivityNo
Audio D/A Converter192kHz/24-bit
Output Impedance / Channel8 ohms
Video Inputs4 HDMI, 3 Component, 4 Composite
Video Outputs1 HDMI, 1 Component, 1 Composite
Audio InputsDigital coaxial x 2, Digital optical x 2
Audio OutputsPre-out
Amplifier Output Details110W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
Output Power / Channel110W (8 ohms, 20Hz-20kHz, 0.08% THD)

Related product manuals