o
Speaker Select
Makes settings for the speakers outputting sound.
Surround Back: Sound is output from the surround back speakers.
Height: Sound is output from the front height speakers.
Wide: Sound is output from the front wide speakers.
0
When “Assign Mode” setting is “Main Only”, you can make this setting.
(v
p. 189)
0
This can be set when the surround mode is set to “Multi Ch Stereo” or “Neo:X”.
o
Subwoofer
Turn subwoofer output on and off.
On
(Default):
The subwoofer is used.
Off: The subwoofer is not used.
You can set this when the sound mode is “Direct” or “Stereo” and in the menu
“Subwoofer Mode” is set to “LFE+Main”. (v p. 195)
o
Set Defaults
The “Surround Parameter” settings are returned to the default settings.
Contents
Connections Playback Settings Tips Appendix
155
Front panel Display Rear panel Remote Index
To Next Page
Loading...
