Marantz SR6009 - Page 191

o
Surr. Back
Set the presence, size and number of surround back speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround back speakers
are not connected.
2 spkrs
(Default):
Use two surround back speakers.
1 spkr:
Use only one surround back speaker.
Connect to the L terminal to SURROUND
BACK when this setting is selected.
When “Assign Mode” setting is “Main Only”, you can make this setting.
(v p. 189)
o
Front Height
Set the presence and size of the front height speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the front height speakers are
not connected.
The “Front Height” setting can be set when “Assign Mode” is set to “Main Only”
and “Main Speakers” are set to “Front Height”. (v p. 189)
o
Front Wide
Set the presence and size of the front wide speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the front wide speakers are
not connected.
The “Front Wide” setting can be set when “Assign Mode” is set to “Main Only”
and “Main Speakers” are set to “Front Wide”. (v p. 189)
Contents Connections Playback Settings Tips Appendix
191
Front panel Display Rear panel Remote Index