Marantz SR7010 - Page 26

Paths to be conrmed Display Settings What to conrm
4
Digital (signal) Path
(ZONE3)
L1
A 0 4 Z 3 D I G
L2
* * * . * d B
Input Source : Online Music
Input Mode : Auto
Sound mode： STEREO
Amp assign : 7.1ch + ZONE3
Speaker for ZONE3 : Front Wide/Height2
Floor Layout : 5ch
Height Sp : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE ON
ZONE2 OFF
ZONE3 ON
・Digital(PCM) input ⇒ Amp Assign Speaker output ( Front Wide ( ZONE3 ) L / R )
・Digital ( PCM ) input ⇒ Preout output ( ZONE3 L / R )
(
b
As the input source, you can switch from Online Music to other ones.)
5
HDMI (signal) Path
L1
A 0 5 H D M I
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : HDMI (xed)
Sound mode： STEREO
Amp assign : 9.1ch
Floor Layout : 5ch&SB
Height Sp : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE ON
ZONE2 OFF
ZONE3 OFF
・HDMI input ⇒ Speaker output (Front L/R)
・HDMI input ⇒ Preout output (Front L/R)
(
b
The input source can be switched to any source except CBL/SAT.)
6
Analog AD (signal) Path
(MAIN ZONE)
L1
A 0 6 A D
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Analog (xed)
Sound mode： MULTI CH STEREO
Amp assign : 9.1ch
Floor Layout : 5ch&SB&FW
Height Sp : 2ch
Dolby Sp : None
Height Layout : Front Height
Speaker Select : Floor
Speaker Cong All Speaker=Small/SW=Yes(2ch)
MAIN ZONE ON
ZONE2 OFF
ZONE3 OFF
・Analog input ⇒ Speaker output (Front L/R, Center, Surround L/R, Surround Back L/R, Front Wide L/R)
・Analog input ⇒ Preout output, SW(20Hz) (Front L/R, Center, Surround L/R, Surround Back L/R, Front Wide L/R, SUbwoofer)
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
7
Analog Amp Assign (signal) Path
(Amp Assign：ZONE2)
L1
A 0 7 Z 2 A S S
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： STEREO
Z2 Source : Source
Amp assign : 7.1ch + ZONE2
Speaker for ZONE2 : S.Back
Floor Layout : 5ch
Height Sp : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE ON
ZONE2 ON
ZONE3 OFF
・Analog input ⇒ Speaker input (Surround Back (ZONE2) L/R)
・Analog input ⇒ Preout input (ZONE2 L/R)
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
8
Analog Amp Assign (signal) Path
(Amp Assign：ZONE3)
L1
A 0 8 Z 3 A S S
L2
* * * . * d B
Input Source : CBL/SAT
Input Mode : Auto
Sound mode： STEREO
Z3 Source : Source
Amp assign : 7.1ch + ZONE3
Speaker for ZONE3 : Front Wide/Height2
Floor Layout : 5ch
Height Sp : 2ch
Dolby Sp : None
Height Layout : Front Height
MAIN ZONE ON
ZONE2 OFF
ZONE3 ON
・Analog input ⇒ Speaker output (Front Wide (ZONE3) L/R)
・Analog input ⇒ Preout input (ZONE3 L/R)
(
b
The input source can be switched to any source except CBL/SAT.)
(
b
Volume -20dB is the value when Relative settings are used. The value is 60 when Absolute settings are used)
g.04a
g.04b
g.05a
g.05b
g.05c
g.06a
g.06b
g.07
g.08
26