Marantz SR7010 - Settings

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center
channel.
204
Subwoofer Level Adjust This setting adjusts the volume level for the subwoofer. 204
Surround Parameter Adjusts surround sound parameters. 205
M-DAX Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
210
Audio Delay Compensates for incorrect timing between video and audio. 211
Volume Sets the MAIN ZONE (room where the unit is located) volume setting. 211
Audyssey
Makes Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
, Audyssey Dynamic
Volume
®
, Audyssey LFC
TM
and Audyssey DSX
®
settings.
212
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker. 216
.
Video
Picture Adjust Adjusts picture quality. 219
HDMI Setup Makes settings for HDMI video/audio output. 221
Output Settings Makes settings for video output. 227
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2. 231
On Screen Display Configures the on-screen display settings. 231
TV Format Sets the video signal format to be output for the TV you are using. 232
Contents Connections Playback Settings Tips Appendix
Settings
198
Front panel Display Rear panel Remote Index