Marantz SR7300 - 4 Revision History

Hardware Software Interface (HSI) Spec. Page: 19 / 19
SR7300/SR7300OSE Document Version [2.01]
4. Revision history
Rev. Date Owner Change description
2.0 ‘03-01-31 N.Sakamoto Renewal issued
2.1 ‘03-02-06 N.Sakamoto - Auto Freq. up/down command were changed to Auto Freq. up/down
Start/Stop に変更．
- Added status answers “Not tuned”, “Tuned, Scaning” for the statu request for
the tuner frequency section. (Not tuned :E0xxxx, Tuned:E1xxxx, Scaning:E2)
- Added the commands for “OSD ON/OFF”.
- Added the commands for Speaker A,B.
- modified SpeakerA ON (H1), OFF (H2), Speaker B ON (H3), OFF (H4)
commands to I1, I2, I3, I4.