Need help?Do you have a question about the Marantz SR880 and is the answer not in the manual?
General| Tuning range | FM: 87.5-107.9 MHz, AM: 530-1710 kHz |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 47k ohms |
| Input sensitivity | 200 mV |
| Channel separation | > 60 dB |
| Speaker load impedance | 4-16 ohms |
| Video Connections | Composite, S-Video, Component |
| Video Inputs | 3 |
| Outputs | Composite: 2, S-Video: 2, Component: 2 |
| Surround Sound Formats | Dolby Digital, DTS |
| Power Output | 125 watts per channel (8 ohms, 20Hz-20kHz, 0.05% THD) |
| Total Harmonic Distortion (THD) | 0.05% (20Hz-20kHz, 125W) |
Essential safety and operating instructions for appliance use and maintenance.
Guidelines for safe electrical connection, polarization, power cords, plugs, and antenna grounding.
Precautions regarding servicing, damage assessment, replacement parts, safety checks, and proper use of carts/stands.
Detailed identification of all indicators and controls on the front panel of the receiver.
Welcome message and highlights of the SR880 receiver's main capabilities and technologies.
Important steps before connecting equipment and guidance on preventing interference.
Details on all audio and video input/output connections for various components.
Connectors for FM/AM antennas and digital sources, plus multi-room, subwoofer, and remote connections.
Controls for power, night mode, headphones, multi-room, and surround mode selection.
Buttons and functions for tuning, tone adjustments, balance, auxiliary inputs, and display settings.
How to connect the SR880 for system remote control operation with other Marantz components.
Instructions for connecting a subwoofer speaker or powered subwoofer to the SR880.
Recommendations for choosing speakers and understanding speaker types (Large/Small) for optimal setup.
Detailed steps for setting front, surround, center, and subwoofer speaker parameters in the setup menu.
Steps to power on the unit, set tone controls, and navigate the on-screen main menu.
Guide to configuring speaker settings (front, center, subwoofer) via the setup menus.
Using the test tone feature to set speaker levels and adjusting delay times for surround modes.
Overview of the remote control's basic operation, input selection, and operating modes.
Explanation of how to use the MACRO function for creating custom command sequences.
Details on cloning, power control, macros, direct commands, page selection, and function selection.
Description of various buttons, windows, indicators, and battery installation for the RC2000 remote.
Instructions for operating the RC2000 in its factory default mode for controlling various components.
Step-by-step guide on how to teach the RC2000 to learn commands from other remote controls.
Methods for renaming functions and clearing memorized codes and names from the RC2000.
Detailed guide on programming and executing macro sequences for automated control.
How to execute programmed macros and assign macros to specific function buttons.
Procedure for duplicating the RC2000's memory contents to another RC2000 unit.
How to adjust lighting features and configure RC-5 code sets for the remote control.
Information on remote control range, battery replacement, and proper installation.
Explanation of the information displayed on the TV screen via the On-Screen Display feature.
How to access and navigate the main menu of the on-screen display system.
Steps to select audio, video, and digital input sources, and configure surround modes.
Using the test tone feature to check speaker output and levels.
Configuration options for multi-room audio, speaker settings, LFE level, sleep timer, and volume.
Information shown on screen when selecting audio/video sources or surround modes.
Displays related to test tone operation and speaker channel level adjustments.
How master volume changes and general button presses are displayed.
Displays related to mute, sleep timer, multi-room status, and OSD activation/deactivation.
How to tune into FM/AM stations, adjust modes, and use tone/volume controls.
Methods for automatically and manually presetting stations, scanning presets, and clearing stored stations.
How to assign custom names to preset stations using alphanumeric characters.
Procedures for playing sources, switching audio/video, recording, copying tapes, and setting the sleep timer.
Steps for playing back digital signals via RF, optical, or coaxial connections.
Overview of available surround sound modes (Dolby AC-3, Pro Logic, Movie, etc.) and their features.
How to calculate and set the correct delay time for optimal surround sound effects.
Step-by-step guide to playing sources in Dolby Digital (AC-3) or other surround modes.
Instructions for playing sources using Dolby Pro Logic, Movie Surround, and 3CH Logic modes.
How to play sources using Hall Surround and Matrix Surround modes.
How to listen to audio sources in a different room and operate the multi-room system.
Guide to identifying common issues, their causes, and recommended solutions.
Troubleshooting general malfunctions, electrostatic discharge effects, and how to reset the unit.
Detailed technical specifications for FM/AM tuners and the audio section.
Specifications for video format, power, dimensions, weight, and included accessories.
To Next Page
