Zone Rename
Change the display title of each zone to one you prefer.
MAIN ZONE / ZONE2
Set Defaults:
The default setting is restored for the edited
zone name.
0
Up to 10 characters can be input.
Smart Select
Sets the “Smart Select” parameters and display name.
o
Name
Change the Name that appears on the TV screen to one you prefer.
0
Up to 16 characters can be input.
o
Input Source/Master Volume/Sound Mode/
Balance/Subwoofer/M-DAX/Playback
Content/All Zone Stereo/TV Audio Sharing
Enabled
(Default):
The current settings are registered when
Smart Select is registered. In addition,
when Smart Select is called up, the
content of the registered settings is called
up.
Disabled:
Settings are not registered when Smart
Select is registered. In addition, when
Smart Select is called up, the content of
the registered settings is not called up.
0
“Smart Select” can be set for each Smart Select.
0
When “Input Source” is “Disabled”, Video Select information is not registered/
called up either.
Contents Connections Playback Settings Tips Appendix
168
Front panel Display Rear panel Remote Index
To Next Page
Loading...
