22 Rev 20201007
Tide Correction: When selected it will adjust for oceanic tide.
Sonar Chart Density: Changes the contour line details on lakes
you have recorded or public lake information if available.
Note: When using Sonar Chart Live set to “Very High” to see
1ft contours.
Very High- 1ft contour lines
High- 2 ft contour lines
Medium- 4 ft contour lines
Low- 8 ft contour lines
Shallow Water: Setting the shallow water to your desired depth will
create red dots on your map at that set depth and shallower.
Min Fish Range: When depth is set it will highlight the desired
depth and shallower.
Max Fish Range: When depth is set it will highlight the desired
depth and deeper.
To Next Page
Loading...
