Marcy 1201R - Assembly Instructions; Step 1: Front Stabilizer Attachment; Step 2: Component Connections

www.puretecfitness.com
6
STEP 1
ASSEMBLY INSTRUCTION
Attach the front stabilizer (3) to the main frame (1), securing with two allen screws (2), two spring
washers (4) and two curved washers (5).
1
5
4
3
2
STEP 2
Connect middle extension hand pulse wire (47) with rear extension hand pulse wire (46). Attach
support tube (40) to main frame (1), and tighten with 6 sets of allen screw (21) and flat washer (38).
Attach the leveling pad (39) to the bottom of main frame (1).
Attach rear stabilizer (6) to the support tube (40) and tighten with 2 sets of carriage bolt (23), curved
washer (24) and domed nut (31).
Tip: Avoid pinching the Extension Wires
1
31
24
23
6
46
21
38
47
38
21
40
21
39
38