Marcy cl203 - Computer Instructions

COMPUTER INSTRUCTIONS
FUNCTION MARK:
SCAN:
Auto scan
ODO:
Total distance
SPEED:
Speed
CAL:
Calorie
DIST:
Trip distance
♥
Pulse
TIME:
Riding time
FUNCTIONS:
1. Reset: Pressing the button for more than 3 seconds will reset all functional values to zero except
Odometer.
2. Scan: Press the button until the arrow points to SCAN, monitor will automatically cycle between
SPEED, DIST, TIME, ODO, CAL and ♥ every 6 seconds.
3. Time:
Press the button until display TIME, monitor will count up your riding time.
4. Speed: Press the button until display SPEED, monitor will display the current speed in Km/hr.
5. Distance:
Press the button until display DIST, monitor will display the trip distance you are
travelling in Km.
6. Calories: Press the button until display CAL, monitor will accumulate the calorie consumption.
7.
ODOMETER: Press the button until display ODO, monitor will display the total accumulated
distance.
8.
Pulse: Press the button until display ♥, monitor will display your current heart rate in beats per
minute.
If the sensor is contact with hand, before measuring your pulse, place the palms of your hands on
the both of the contact pads and the monitor will show up your current heart beat rate in beats per
minute (BPM).
11