6. This water heater MUST be permanently connected to a xed circuit breaker.
7. DO NOT install this water heater near volatile or ammable substances, near tinder
wood or near a strong magnetic eld.
8. DO NOT switch the heater on if you suspect that it may be frozen. Wait until you are
sure that it has completely thawed out.
9. Before taking a shower, feel the outlet hot water temperature with your hand to
make sure it is suitable for showering to avoid getting scalded.
10. Before connecting the water heater hoses to the plumbing in your home, it is
extremely important to FLUSH the lines to wash out any plumbing paste or residue in
the lines.
11. The heating chamber is treated with composite nano-insulation material. It is
normal for there to be a slight odor and possibly a small amount of green/blue smoke
when the unit is used for the rst time.
12. If there is damage to the wiring or any internal part, you must contact a qualied
electrician to replace it, or send it to one of our service centers for repair.
(Replacement parts are available from Marey.)
13. The shower head should be cleaned and checked periodically for debris and
build-up.
14. This water heater must be installed vertically, per the mounting instructions.
1. Energy ecient, instantaneous heating on demand. It's tankless, so no preheating
and no stand-by heat loss, which saves even more energy.
2. Micro-computer controlled, patented heating technology.
3. Extremely safe! Water is completely separated from electricity by multi-layers of
composite nano-insulation material, and the heater contains multiple additional safety
devices, as outIined below.
4. Over-heating treaches 153° F / 67°C, the electricity is automatically cut o. If this
occurs, the screen hermal cut-o to avoid scalds. When the outlet water temperature
beeps and displays an E1 code.
PRODUCT FEATURES
06
To Next Page
Loading...
Need help?
General
