Marey GA30NG - ACCEPTABLE AND APPROVED VENT PRODUCTS; Acceptable Vent Products List; Approved Direct Vent Products

32
ACCEPTABLE VENT PRODUCTS:
APPROVED VENT PRODUCTS FOR DIRECT VENT:
The thickness of the wall where the vent system is installed shall not be less than 10in.
Manufacturer
Listed and tested
vent products
Telephone
Fax
Contact
Z-Flex 2SVSRCF04 800-654-5600 888-889-3539
sales@z-ex.com
www.novaex.com
Manufacturer
Part number
Part descripon
diagram
Z-Flex
2SVEPWC(F)(03-05)
3in. 4in. twin pipe
Z-Flex
Z-Vent
Single wall 45
°
Elbow
Z-Flex
Z-Vent
Single wall 90
°
Elbow
Z-Flex
2SVSTS
3in. 4in. pipe
terminaon