What to do if my Marey G6FLP Water Heater has improper operation for water temperature adjusting?
If your Marey Water Heater has improper operation for water temperature adjusting, turn the water & gas controlling valves to the right position.
What to do if my Marey G6FLP Water Heater has main gas valve half opened?
If the main gas valve of your Marey Water Heater is half opened, fully open the gas valve.
What to do if my Marey G6FLP is freezing?
If your Marey Water Heater is freezing, it can be used only after the ice is melted.
What to do if my Marey Water Heater has air inside the gas pipe?
If there is air inside the gas pipe of your Marey Water Heater, continuously open and close the hot water valve until the flame is ignited.
What to do if the main cold water supply is not opened for my Marey Water Heater?
If the main cold water supply is not opened for your Marey Water Heater, fully open the main water supply valve.
What to do if my Marey Water Heater lacks fresh air?
If your Marey Water Heater lacks fresh air, ventilate the room immediately.
What to do if the safety device is working on my Marey G6FLP?
If the safety device is working on your Marey Water Heater, re-start the water heater. If it still doesn’t work, contact the customer service dept.
What to do if my Marey G6FLP Water Heater has positional changer of ignition distance?
If your Marey Water Heater has positional changer of ignition distance, adjust the ignition distance.
What to do if my Marey Water Heater has cold water supply pressure is too high?
If the cold water supply pressure is too high in your Marey Water Heater, adjust the cold water supply valve.
What to do if there is not enough water flow through the Marey G6FLP Water Heater unit?
If there is not enough water flow through the Marey Water Heater unit, increase water flow through the unit.
General| Type | Tankless |
|---|---|
| Power Source | Electric |
| Fuel Type | Electric |
| Maximum Temperature | 140°F |
| Ignition Type | Electric |
To Next Page
