Mark Robin - Redundancy; Rescue Deployment; Overload; Temperature

2.6 Redundancy
A training is not an emergency! At every training situations as well as rope access a
redundant saftey system has to be installed. Unforeseen events, technical or human
failure cannot be ruled out. For redundancy safety measures you can also use a second
MARK Robin.
2.7 Rescue deployment
After each rescue deployment the device has to be inspected by MARK Save A Life
or an authorized partner in order to ensure safe use. We recommend using dierent
devices for training and rescue deployments.
2.8 Overload
Devices that have been subjected to a fall or a heavy load must be retired.
2.9 Temperature
This product can be used in environments between – 40° C and + 65°C .
