WARNING
3.4 Anchor device
Attachment on anchor device
Improper attachment on an anchor device may lead to falls resulting in severe
injuries or death.
• Inspect the anchor at least once a year.
• Only use anchors that correspond the requirements of PPE.
Anchor devices are necessary in places that present falling hazards (acc. to §72 AAV).
The building planner/owner is responsible for the positioning and installation of anchor
devices according to the applicable legal requirements, norm and rules.
Buildings and plant structures have to present appropriate load capacities. According to
the applicable standards the following (static) loads are installed in the building.
• Restraint systems 4 kN
• Fall protection systems 12 kN
On www.savealife.at you will find the following documents available for download:
• instructions for use for MARK Gekko and MARK Boa
• checklist for installation and regular inspection
• checklist inspection protocols
• installation protocol and sub-structure checklist
3.5 Training
The customer and user must take care that he has understood the functionality of this
product and all safety notes and knows how to safely use this product. He must com-
plete a training on correct use, installation, inspection, maintenance and use limitations
before using this product. He should repeat the training regularly without endangering
trainees or users.
Training inspection requirements for this product must be followed (see inspection
and maintenance).
Trainings are an important part of MARK Save A Life products and services. No pro-
tective equipment will save you from injury or death if you do not know how to use it
properly.
In order to ensure your safety, we oer trainings where you can learn how to safely
operate this product.
For further information please contact us at +43 7563 8002 111.
NOTE
To Next Page
Loading...
