Mark Robin - Page 55

 LEGAL INFORMATION
• Do not remove labels or other markings from this product.
• Use an inventory number for this product. Enter the inventory number in the
inspection protocol.
• This product has a serial number. The serial number is entered on the instruction use
and on the product.
10.1 Declaration of conformity
The manufacturer, MARK Save A Life GmbH, Gleinkerau 23, 4582 Spital am Pyhrn,
Austria / Europe, hereby declares that this product („MARK Robin”)
• conforms with the safety regulations for PPE against falls from a height (Cat. III/PPE
Regulation (EU) 2016/425) and abides by the following standard
EN 341:2011 Klasse 1A
ANSI Z359.4:2013
• is identical with the PPE against falls from a height inspected by the accredited
testing, inspection and certification body AUVA-STP - Sicherheitstechnische Prüf-
stelle IZ NÖ Süd, Straße 15, Objekt 77, Stiege 2, 2351 Wiener Neudorf, with the
number
Identification number 0511
• is subject to the quality management system under the control of the accredited
testing, inspection and certification body AUVA-STP - Sicherheitstechnische Prüf-
stelle IZ NÖ Süd, Straße 15, Objekt 77, Stiege 2, 2351 Wiener Neudorf, with the
number
Identification number 511
10.2 Product liability
MARK Save A Life does not assume liability for any direct, indirect consequences or
consequences associated with accidents that result from improper use of this product
or from false information made by a competent person or fitter on the test protocol or
acceptance protocol.
10.3 Copyright
The layout, visuals, pictograms, photos and any other information in these instructions
for use are protected by copyright.
10.4 Trademarks
All trademarks are the property of their respective owners.
