37
CV
Explanation
Values
Default Notes
67
PoM
-
94
PoM
Speed table speed level 1 (Vmin) to
speed table speed level 28 (Vmax)
0 - 255
95
PoM
Reverse trim 0 - 255 128
The CV value divided by 128 gives the fac-
tor with the speed level is multiplied when
the locomotive is running in reverse.
112
PoM
113
PoM
114
PoM
Physical output (mapping): front light mode
Physical output (mapping): front light dimmer
Physical output (mapping): front light period
0 - 16
0 - 255
0 - 255
1
255
20
See table*
bis
135
PoM
Physical output (mapping): rear light,
Aux 1 to Aux 6 (each one in the 3rd block)
See table*
137
PoM
Switching range 0 - 128 128
128 = 50% of speed level, 64 = 25% of
speed level
173
PoM
Storing different states:
Storing function states
Storing speed
After a reset starting up with/without ABV
0 / 1
0 / 2
0 / 4
7
0 = do not store, value = store
Individual values must be added.
174
PoM
Storing different states:
storing direction of travel
0 / 1 1
0 = do not store
1 = store
176
PoM
Vmin Analog DC 0 - 255 100 Must be smaller than CV 177
CV Table for DCC
* An extensive table for function mapping can be found on the Internet at:
www.maerklin.de/de/produkte/tools_downloads/technische_infos.html
PoM must be supported by the locomo-
tive controller / central controller.
To Next Page
Loading...
