2E20
N
Operator’s Manual
This product is in conformity with the EMC requirements as for the directives:
2004/108/CE
This product is intended to operate in industrial locations; it is not intended for connections
to a public mains network but is intended to be connected to a power network supplied
from a high or medium voltage transformer.
This product is in conformity with the “Electrical Safety” requirements as for the directive
73/23/CEE
Electrical safety
The equipment has been manufactured in conformity with EN 61010-1 specifications.
Manufacturer: Marposs S.p.A.
Address: Via Saliceto 13, Bentivoglio (BO) Italia
www.marposs.com
Manual Code: D2200004UA
Issue: September 1995
Edition: (02) January 2006
Iussed by: Marposs S.p.A. , Via Saliceto 13, Bentivoglio (BO) Italia
MARPOSS S.p.A. does not take on the obligation of notifying possible further
changes to the product.
The descriptions reported in this book do not authorize any tampering by non-
authorized personnel.
The warranty on the equipments will decay if such tamperings are found.
© Copyright Marposs S.p.A. 2006
D2200004UA_02.doc (Save Date 20/01/06 15.47)
To Next Page
Loading...
