4E20
N
Operator’s Manual
Preface
The information contained in this manual are aimed to the following type of operator:
• Machine operator, whose task is to check the correct operation of the system
by means of signallings toward the machine logic.
If necessary, he can olso make interventions on the system is order to adapt it to
the programming and to optimize the times of interventions on the system and
therefore its production.
The instructions refer to all possible configurations of the MARPOSS E20N,so only
the parts relevant to specific application must be considered.
Warning
All servicing or special maintenance operations must be carried out by
authorized personnel
To Next Page
Loading...
