8
TS30 90° - TOUCH PROBE for TOOL PRESETTING
1.4 Technical Assistance
When requesting technical assistance, ensure that you have the following information to hand: part
number, page number referred to the total number pages, revision summary. The correct reference
ensures quick and accurate answers. In the event of a fault condition that requires the assistance of
Marposs personnel, contact the nearest service centre (visit the website www.marposs.com for a
list of distributors).
If updates are not carried out in conformity with the instructions provided, or without the
manufacturer's written permission, or in such a way as to compromise correct operation or modify its
characteristics, the manufacturer will not accept any responsibility if the application fails to function
correctly. The warranty, as agreed in the contract, will be declared null and void in the event of any
unauthorised modifications being carried out. Therefore, any modification or operation not expressly
mentioned in this technical document is to be considered unauthorised. If the necessary procedures
are not described in this manual, contact the equipment dealer or manufacturer. The warranty, as
agreed in the contract, will be declared null and void in the event of any unauthorised modifications
being carried out. Therefore, any modification or operation not expressly mentioned in this technical
document is to be considered unauthorised. If it is necessary to carry out updates not covered by
this user and maintenance manual, contact the distributor or software manufacturer. When
contacting Marposs technical assistance, please make sure you have the following information to
hand: label indicating the unit code no. (MODEL: 39278775XX) and serial number (SERIAL
N.00A0000) See the example in the following figure.
Figure 1-2. Probe identification data
Code N.:39278775XX
S/N: 00AA0000
To Next Page
