7
Chapter 1 • STANDARDS AND WARNINGS
1. STANDARDS AND WARNINGS
FOREWORD
This document, or any part thereof, may not be reproduced or disclosed to third parties, by any
means or in any form, without the prior authorisation of the author.
Legal action will be taken in the event of any violations of this condition.
1.1 Description of the manual
This manual provides all the information necessary to understand the MARPOSS product in your
possession and to use it correctly.
THE PURCHASER SHALL BE RESPONSIBLE FOR ENSURING THAT THE PERSONNEL
RESPONSIBLE FOR INSTALLING AND OPERATING THIS MARPOSS PRODUCT HAVE READ
AND UNDERSTOOD THIS MANUAL AND ALL ITS CONTENTS.
The contents of this manual are intended for use by the following categories of personnel involved in
using and operating the product:
• Safety manager responsible for the area in which the product is used.
• MARPOSS or customer personnel directly responsible for installing the product.
• Customer technical personnel operating directly with the MARPOSS product for production
activities.
• All other personnel who are legitimately authorised to use or work on the product.
The manual is an integral part of the product and therefore must be kept intact and available to the
user for the entire duration of the working life of the product.
The manufacturer’s responsibility is limited to the correct use of the product, as defined in this
manual and its attachments.
The product must be used as specified in this manual: therefore it is important to read it thoroughly
before installing the product and using it, without omitting anything, and paying special attention to
any messages which may appear in the text boxes. Observing all the regulations and suggestions it
contains will ensure that the product remains safe to use. In the event of discrepancies between the
content of the manual and the product, the Purchaser should inform the manufacturer before using
it.
For any data that is not included in the following pages, or that cannot be derived from the
information provided on them, contact the manufacturer.
1.2 Original version
This document was originally issued in Italian language.
Should there be any disputes due to the translations, even if made by MARPOSS the reference text
will be the Italian version only.
1.3 Final test and warranty
The company's warranty covers the faults in materials and execution:
• WARRANTY DURATION: the warranty covers the product and all repairs made within the
agreed warranty period.
• WARRANTY SUBJECT: the warranty applies to the product or its parts identified by a serial
number or other identification number used by MARPOSS.
The warranty described above is valid unless different agreements exist between MARPOSS and
the Purchaser.
To Next Page
Loading...
