Marquant 005-069 - USE; Battery Installation; Weighing Without Parameter Settings

EN
36
• Remove the batteries if the product is
not going to be used for 3 months, or
longer.
TOUCH BUTTONS
SET Starts the scales and browses
through the parameters
(see section on setting
personal parameters).
The value increases by 1 when
pressed. Keep pressed to increase
the values more quickly.
The value decreases by 1 when
pressed. Keep pressed to decrease
the values more quickly.
WEIGHING WITHOUT
PARAMETER SETTINGS
1. Insert the batteries and put the bathroom
scale on a level, stable surface for best
precision. Do not put it on a carpet or
other soft surface.
FIG. 3
2. Carefully step onto the bathroom scale,
which starts automatically. Stand still,
spreading your weight uniformly until the
display stabilises.
FIG. 4
3. The weight value ashes when the display
has stabilised.
FIG. 5
NOTE:
The measurements can deviate for the
following persons:
– Persons younger than 10, or older
than 100 (can only use the
weighing function).
– Persons over 70 years old.
– Well-trained athletes.
USE
CAPACITY
Range Precision
Weight – 0.1 kg
Body fat
percentage
4.0–60.0% 0.1%
Water content 27.5–66.0% 0.1%
Muscle
percentage
20.0–56.0 % 0.1%
Bone
percentage
2.0–20.0% 0.1%
Calories – 1 kcal
SCALE UNIT
• The bathroom scale uses a high-precision
strain gauge.
• The bathroom scale measures water
content, body fat percentage, muscle and
bone, plus BMI, and also indicates a
recommended calorie intake.
• The bathroom scale has a built-in memory
for 12 dierent users.
• The scale calculates your daily energy
requirement on the basis of your height,
weight and age, etc.
INSERTING THE BATTERIES
1. Open the battery compartment
underneath the scale.
FIG. 2
2. Insert the batteries.
3. Replace the cover.
NOTE:
• Make sure to insert the batteries with
the correct polarity.
• Only use batteries of the recommended
type.