FRONT PANEL FUNCTIONS (CONT.)
18. DEL (CONT.)
ENGLISH
Vintage
Vintage Delay recreates the sound of analogue delays. Vintage Delay’s editable
parameters are:
DELAY TYPES
PARAMETER VALUE RANGE DESCRIPTION
Time 0 - 4000 Controls the Delay repeat time in milliseconds.
Feedback 0 - 10 Adjusts the number of Delay repeats.
Age 0 - 10 Adjusts the amount ‘utter’ and higher frequency
roll-off for a more vintage sounding Delay
Level 0 - 10 Adjusts the volume level of the Delay effect.
Multi
Multi Delay adds a rhythmic repeat for more complex delay patterns. Multi Delay’s
editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Time 0 - 4000 Controls the Delay repeat time in milliseconds.
Feedback 0 - 10 Adjusts the number of Delay repeats.
Tap Pattern 1 - 4 Select from four different Delay repeat patterns
Level 0 - 10 Adjusts the volume level of the Delay effect.
Reverse
Reverse Delay’s repeats run backwards. This can add texture and an eerie quality to
your sound. Reverse Delay’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Time 0 - 4000 Controls the Delay repeat time in milliseconds.
Feedback 0 - 10 Adjusts the number of Delay repeats.
Frequency 0 - 10 Adjusts the amount of higher frequency content in the
Delay repeats
Mix 0 - 10 Adjusts the level of the Delay effect relative to the
unaffected signal. As the amount to Delay is increased,
the unaffected signal is decreased, and vice versa.
FRONT PANEL FUNCTIONS (CONT.)
The DEL Section Switch LED will ash in time to the current Delay time or tempo
when active.
ENGLISH
18. DEL (CONT.)
Tap Tempo
Set the Delay time by tapping the EDIT selector, or by tapping an assigned button on
the optional CODE footcontroller. This enables you to quickly and easily match the
Delay time with the tempo of the music you are playing.
To activate TAP TEMPO:
• Press MOD and DEL Section Switches together.
• The display screen will show the Delay time in milliseconds.
• Either turn the EDIT selector to select the delay time in milliseconds or tap it
repeatedly to nd your delay time or to match a tempo.
• Press EXIT/STORE once to exit TAP TEMPO and return to the main Preset screen.
DELAY TYPES
REVERB TYPES
Room
Room Reverb recreates the acoustic reections of small to larger rooms. Room
Reverb’s editable parameters are:
PARAMETER VALUE RANGE DESCRIPTION
Decay 0 - 10 Controls how long the it takes for the reections to
fade.
Pre-delay 0 - 10 Adjusts the amount of time before the rst reection
is heard.
Tone 0 - 10 Adjusts the amount of higher frequency content in the
reections.
Level 0 - 10 Adjusts the level of the Reverb effect.
!
18. REV
REV is short for Reverb. Reverb FX in a conventional amplier setup can be in stompbox
form, rack form or integrated within an amplier. Your CODE’s Reverb FX are:
To Next Page
Need help?
General
