CV355-30X-IP Manual
www.marshall-usa.com1 2
Table of Contents
1. Package Contents
2. Function Introduction
2.1 I/O Functions Introduction
2.2 Tally Indicator Light Function Description
3. Installation Instructions
3.1 Installation Basics
3.2 Connecting Devices
4. Network Function Settings
4.1 Web System Requirements
4.2 Connecting Camera to Network
4.3 Web Page Function Description
5. Specifications
6. Troubleshooting
Warranty
Safety Instructions
04
04
04
05
05
05
06
09
09
09
12
24
26
27
02
Safety Instructions
1. Operation
1.1 Please use the product in the recommended operating environment.
1.2 Do not place the product in tilted position.
1.3 Do not place the product on an unstable trolley, stand or table.
1.4 Do not use the product near water or source of heat.
1.5 Use attachments only as recommended.
1.6 Use the type of power source indicated on the product. If you are not sure of the type
of power available, consult your distributor or local electricity company for advice.
1.7 Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire:
• Ensure the plug is free of dust before inserting it into a socket.
• Ensure that the plug is inserted into the socket securely.
1.8 Do not overload wall sockets, extension cords or multi-way plug boards to avoid
potential risks.
1.9 Do not block the slots and openings in the case of the product. They provide ventilation
and prevent the product from overheating.
1.10 Except as specifically instructed in this User Manual, do not open or remove covers,
otherwise it may expose you to dangerous voltages and other hazards. Refer all
servicing to licensed service personnel.
1.11 Unplug the product from the wall outlet and refer servicing to licensed service personne
l when the following situations happen:
• If the power cords are damaged or frayed.
• If liquid is spilled into the product or the product has been exposed to rain or water.
2. Installation
2.1 For security considerations, please make sure the standard hanging rack you bought is
in line with UL or CE safety approbations and installed by technician personnel approved
by agents.
3. Storage
3.1 Do not mount camera where power cord can be stepped on, as this may result in
fraying or damage to the lead or the plug.
3.2 Never push objects of any kind through cabinet slots. Never allow liquid of any kind to
spill onto or into the camera body.
3.3 Unplug this product during thunderstorms, during electrical surges, or if it is not going
to be used for an extended period of time.
3.4 Do not place camera or accessories on top of vibrating equipment or heated objects.
To Next Page
Loading...
Need help?
General
