Marshall Amplification CV620-IP User Manual

CV620-IP / CV620-IPW
27 User Manual v.1
Chapter 7. Network Function Settings Description
7.1 Web System Requirements
Web Browser: Internet Explorer 8 ~ 11
7.2 Online IP Camera
7.2.1 Connecting to Internet
Two common connection methods are shown below
1. Connecting via switch or router
2. To connect directly through network cable, the IP address of the computer should be changed so
that it is on the same network segment as the camera; for instance 192.168.100.x (preset for
camera)
 Connection diagram
 Change network settings
7.2.2 Use the web browser
1. Open the IE browser, and enter the URL of CV620-IPW in the address bar, such as:
http://192.168.100.150 (default IP address)
2. Enter administrator’s account and password to get started
Account: admin (Default)
Password: 9999 (Default)
Note: 1. “Web Plugin” must be installed before the first use. Please install the program after
downloading according to instructions on the screen (as shown in the following figure)
CV620-IPW
Switch or router
Computer
Network cable
Network cable
CV620-IPW
Computer
Network cable

Marshall Amplification CV620-IP Specifications

General

Brand	Marshall Amplification
Model	CV620-IP
Category	Security Camera
Language	English