CV620-IP / CV620-IPW
35 User Manual v.1
3. Preset Save
Note: SNTP server address: Please change in network setting
7.3.11 Setting -- Network and Port Setting
1. Network address of camera: Change of setting is available only when DHCP function of camera
is turned off; please turn off DHCP function using CV620-IPW
screen menu, and for setting of each item of screen menu, see 5.2
Setting Menu
2. Set RTMP: Set connection address of RTMP depending on RTMP Server setting
3. Set RTSP: Enable/Disable Multicast
Note: It is suggested to enable Multicast when the number of users online watching the live
image simultaneously is more than 4.
4. Set SNTP: Set SNTP Server IP
5. Set HTTP port. The default Port value is 80
Note: Change of setting is available only when DHCP function of camera is closed
6. Preset Save
To Next Page
Loading...
