Marshall Amplification CV630-NDI - Chapter 5 Remote Control and Settings; Remote Control Functions; Setting Menu Overview

Marshall
Chapter 5 Remote Control and Setting Menu
5.1 Functions of remote control
<Remark> The below functions are listed alphabetically.
Item Description

,

,

,


Move the lens
Back Light Turn on/off back light compensation
Camera select Choose Camera ID 1 ~ 3
Focus-
Manual /
Far/Near
Turn on manual focus to adjust the focal
length
Focus-Auto Auto Focus
Freeze Freeze the screen
Home-Enter Go back to the main page / Execute
Info Status information
L/R
Direction Set
L/R Direction / Normal
Menu Display OSD menu
Mirror
Rotate the image (OFF / Mirror / Flip /
Rotate)
Pan/Tilt
Reset
Clear the Pan / Tilt setting
Picture Switch image effect (OFF / Neg / B&W)
Power Power Switch
Preset
Appoint an ID (0 ~ 9) to save the current
position data
Reset
Appoint an ID (0 ~ 9) to delete the
current position data
Zoom-Fast Adjust image size
Zoom-Slow Fine-tune image size
Marshall
5.2 Setting Menu
<Remark> Press [Menu] on the remote control to enter the setting menu; the bold underlined
values in the following table are defaults.
1st Level
Major Items
2nd Level
Minor Items
3rd Level
Adjustment Values
Function Descriptions
Exposure
Mode
1. Full Auto
2. Shutter Pri
3. Iris Pri
4. Manual
Exposure mode setting
Exposure
Comp.
On / Off
AE Level
Exposure
Comp. Level
-5 ~ C ~ 5
The value can be adjusted
after Exposure Comp. is
activated
Spot Light On / Off
Spot Light
Position
X (0 ~ 6) Y (0 ~ 4)
The value can be adjusted
after Spot Light is activated
Shutter Pri
60/30
mode
50/25
mode
Adjustable when the
Exposure mode is set to
Shutter Pri
1/10000 1/10000
1/5000 1/5000
1/3000 1/3000
1/2500 1/2500
1/2000 1/1750
1/1500 1/1250
1/1000 1/1000
1/725 1/600
1/500 1/425
1/350 1/300
1/250 1/215
1/180 1/150
1/120 1/120
1/100 1/100
1/90 1/75
CV630-NDI Manual
www.marshall-usa.com21 22