Marshall Amplification CV630-NDI - Chapter 6 Network Settings; Connecting to Network; Connecting to Internet; Viewing via Browser

Marshall
Chapter 6 Network Function Settings Description
6.1 Connecting Camera to Network
6.1.1 Connecting to Internet
Two common connection methods are shown below
1. Connecting via switch or router
2. To connect directly through network cable, the IP address of the computer should be
changed so that it is on the same network segment as the camera
e.g.: The factory-preset default IP address of CV630-IP is 192.168.100.100. The
computer IP address must be set with the same network segment, such as
192.168.100.101, so that the computer can be connected correctly with the camera
 Change network settings
Switch or router
Network cable
Network cable
CV630-NDI
Computer
CV630-NDI
Computer
Network cable
Marshall
6.1.2 Using the Browser to View the Images
 Open the browser, and enter the URL of CV630-NDI in the IP address bar
e.g.: http://192.168.100.100 (default IP address)
 Enter administrator’s account and password
*When log in for the first time, please refer to 6.2.3 Account Management to change
the default password
Marshall NDI Camera
 Account: admin
 Password: 9999
CV630-NDI Manual
www.marshall-usa.com31 32