Marshall Amplification CV630-NDI - Network Configuration; Time Settings

Marshall
6.2.9 Setting – Network
No Item Function Descriptions
1 Network
Network setting of camera. Change of setting is available when DHCP
function is closed.
2 SNTP Setting
Set SNTP Server IP
3 Port Setting
Set HTTP port. The default Port value is 80
<Remark> Change of setting is available only when DHCP
function of camera is closed
1
2
3
Marshall
6.2.10 Setting-Time
No Item Function Descriptions
1
Camera Time
Display the date and time of the camera
2 Set the Time
 Manually: Set time manually
 Synchronize with computer time: Set the camera time according
to the computer time
 Synchronize with SNTP server: Set the camera time
synchronously with the SNTP server
<Remark> SNTP server address: Please change in network setting
1
2
Marshall
6.2.2 Viewing In Real Time
No Item Function Descriptions
1
Pan / Tilt setting
Adjust the Pan/Tilt position of the camera screen
2 Zoom ratio Adjust the zoom-in or zoom-out ratio via scroll bar
3
Preset setting
Select the number first and then select SAVE or LOAD
4 Power button Turn on or turn off the camera power
4
3
2
1
Marshall
6.2.2 Viewing In Real Time
No Item Function Descriptions
1
Pan / Tilt setting
Adjust the Pan/Tilt position of the camera screen
2 Zoom ratio Adjust the zoom-in or zoom-out ratio via scroll bar
3
Preset setting
Select the number first and then select SAVE or LOAD
4 Power button Turn on or turn off the camera power
4
3
2
1
CV630-NDI Manual
www.marshall-usa.com41 42