007.
CHARGING THE INTERNAL BATTERY
Important: Always ensure that the power cable, plug and speaker are
compatible with your mains supply and wall socket.
The Kilburn II is equipped with an internal battery with a playing time for
more than 20 hours at mid volume. Charging the battery from empty to
full charge takes approximatly 2.5 hours.
001. Gently pull open the silicone weather seal on the back of the
speaker.
002. Connect the power cord into the power jack on the speaker.
003. Connect the power plug to the wall socket. The battery charge is
shown on the battery level indicator.
002.001.
003.
Caution: Always unplug the power
cord from the wall socket before
disconnecting it from the speaker.
Close the silicon weather seal after
disconnecting the speaker.
To Next Page
Loading...
